Step 1 Close all protected doors and windows Ready light will be on or flashing when all protected zones and sensors are secure. MAKING THE SYSTEM READY TO ARM If the ready light is not on or if it is flashing then at least one zone is not secure To identify the zones, use the scroll keys ( or ) to the right of the display to browse through the zones that are not secure If the user wishes to bypass or unbypass one of these zones, press the key while that zone is being displayed When finished viewing the zones, press the key to return to the code entry screen ARMING THE SYSTEM IN THE 'STAY' MODE STAY is utilized when the user is inside the premise and wants protection around the perimeter. Chime feature is on Chime feature is off System is on exit delay System is on exit delay, user has 10 seconds to exit Note The user may want to disarm the system if the exit light is still flashing in order to prevent an alarm Note The user may then re-arm the system and exit before the delay expires A fire zone has been faulted A fire zone is in a trouble condition Primary power is on System has a low battery System is ready to arm System is ready to force arm System is not ready to arm because of a zone/some zones is/are being faulted All interior zones are bypassed. UNDERSTANDING THE LIGHTS Light Status/Note Description System is armed System is disarmed There has been an alarm during the previous arm cycle A zone/some zones the keypad's partition is/are bypassed No zones are bypassed System is on abort delay time Code is entered followed by the key during or after an alarm report to the central station Note It stays on until the central station has received the cancel report Note The cancel feature must be enabled.

To program the NX-8V2 Control Panel, enter. The NetworX NX-8V2 represents a new approach to security systems design.

Caddx nx8v2